Bematech KF-6580 User Manual download pdf (Page 19)

KF-6580 · Revision 1.2

Dip Switch Function

1 Reserved Must be in off position

2 PNE ** On: activated

Off: not activated

3 Baud Rate On: 19200 bps

Off: 9600 bps *

4 Stop Bits On: 1 stop bit *

Off: 2 stop bits

5 Character leght On: 7 bits

Off: 8 bits *

6 Parity Select On: Odd

Off: Even *

7 Parity On: not used *

Off: used

8 Presenter On: activated ***

Off: not activated ****

* Default

*** Default for printers with presenter

**** Default for printers without presenter

** ON - Default or :

After Esc m: PNE sensor is returned in status bit (serial or USB) or PE line (Parallel)

After Esc l: Presenter sensor is returned in status bit (serial or USB) or PE line (Parallel)

OFF - Default or after Esc m: always return paper ok

After Esc l: always return paper ok

Chapter 5

Dip SwitchDip Switch

Dip Switch

One set of dip switches is mounted in the control board of the KF-6580. To access these dip switches, please

do as follows:

• Turn off the printer

• Remove the paper from the mechanism

• Remove the screws that hold the cover of the control board

• Using the tables below, change the configuration of the dip switches

• Mount the cover of the control board and fasten the screws back

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

No comments

Bematech KF-6580 User Manual Page 19