Bematech MP-2500 TH User Manual download pdf (Page 103)

MP-4200 TH Programmer’s Manual - Revision 1.0

FS S n1 n2

[Function] Set left- and right-side ideogram spacing.

[Format] ASCII FS S n

    Hexadecimal  1C53n

    Decimal  2883n

[Range]  0≤n

≤255

    0≤n

≤255

[Default]  n

=0,n

=0

[Description] Setleft-andright-sideideogramspacingusingn1andn2,respectively.

•WhentheprintermodelusedsupportsGSP,theleft-sidecharacterspacingis[n1×horizontal

motion unit], and the right-side character spacing is [n2 × horizontal motion unit].

[Notes]   •Whendouble-widthmodeisset,theleft-andright-sidecharacterspacingistwicethenormalvalue.

    •HorizontalmotionunitcanbesetbyGSP.Thepreviouslyspecifiedcharacterspacingdoesnot

change,evenifhorizontalmotionunitischangedbyGSP.

•Thevaluecannotbelessthantheminimumhorizontalmovementamount,andmustbesetin

even units of the minimum horizontal movement amount.

[Reference]  GSP

FS W n

[Function] Turn quadruple-size mode on/off for ideograms.

[Format] ASCII FS W n

    Hexadecimal  1C57n

    Decimal  2887n

[Range]  0≤n≤255

[Default]  n=0

[Description] Turnquadruple-sizemodeonoroffforideograms.

•WhentheLSBofnis0,quadruple-sizemodeforideogramsisturnedoff.

•WhentheLSBofnis1,quadruple-sizemodeforideogramsisturnedon.

[Notes]   •Onlytheleastsignificantbitofnisused.

•Inquadruple-sizemode,theprinterprintsthesamesizecharactersaswhendouble-widthand

double-height modes are both turned on.

•Whenquadruple-sizemodeisturnedoffusingthiscommand,thenextcharactersareprinted

in normal size.

•Ifsomeofthecharactersonasinglelinearedifferentinheight,they’rebaselinealigned.

•FS!andGS!canbeusedtoselectandcancelquadruple-sizemode,selectingdouble-height

and double-width modes.

[References] FS!,GS!

GS F7h EOT NUL ‘ g

…g

[Function] Set default gateway IP address

[Format]  ASCII   GSF7hEOTNUL‘g1…g4

    Hexadecimal  1DF7040027g1…g4

    Decimal  292474039g1…g4

[Default]  0.0.0.0

[Description] ThiscommandsetsthedefaultgatewayIPaddress,whereg1..g4aretheIPaddressoctets.

[Notes] Valid only when ethernet or wi-fi interface is being used.

[Example]  Ifyouwanttosetthegatewayaddressto192.168.1.2thecommandmustbesentas1DF704

    0027C0A80102

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 111 112

Comments to this Manuals

No comments

Bematech MP-2500 TH User Manual Page 103

Comments to this Manuals

Related products and manuals for Print & Scan Bematech MP-2500 TH